Rangefinder basic operations
Single measurement:
Short press the button to start the single measurement.
(Take the distance & angle measurement mode as an example)
(Take the distance & angle measurement mode as an example)
Continuous measurement:
Press the button and keep over 2 seconds,the data displayed alternately on the LCD screen, and the target sign“+”will show on the screen until release the button .
Failure measurement :
The product will shutdown automatically after 8 seconds if no any operations.
If the button is pressed during the power on period, the measurement will be started again.
Noted: If the measure fails, the data on the screen will be displayed as:"----"
